Fujitsu LifeBook A-4170 Software Manual - Page 5
Browse online or download pdf Software Manual for Laptop Fujitsu LifeBook A-4170. Fujitsu LifeBook A-4170 29 pages. Bios setup utility
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Main
Primary Master [TOSHIBA MK6014MAP-(PM)]*
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
User
Total Sectors:
Display only
Maximum
Display only
Capacity:
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
PhoenixBIOS Setup Utility
[Auto]
11733120
6007MB
[16 Sectors]
[Enabled]
[Fast PIO 4]
[Mode 2]
Select Item
-/Space
Select Menu
Enter
Figure 2 Primary Master Submenu
Default
[Auto]
11733120
6007MB
[16 Sectors]
M a i n M e n u
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Item Specific Help
User = you enter
parameters of hard-disk
drive installed at this
connection.
Auto = autotypes
ATA/ATAPI drive
installed here.
CD-ROM = a CD-ROM drive
is installed here.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. Select User to allow
the user to enter the parameters of the hard disk drive.
Displays the total number of sectors available on the hard drive.
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk.
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer. MAX refers
to the size the disk returns when required.
Setup Defaults
Save and Exit
5