AEG Automatic washing machines Installation And Connection Instructions - Page 7

Browse online or download pdf Installation And Connection Instructions for Washer AEG Automatic washing machines. AEG Automatic washing machines 14 pages. Aeg automatic washing machines

Print Page

Installation-Site Preparation

• The installation surface must be clean, dry and level.

• Do not install on deep pile carpet.

• If the appliance ist installed next to heat source (e. g. cooking

appliance), a heat insulating pad (85 x 57 cm) must be placed

between the washing machine and the heat source.

• Do not install the appliance in locations where the temperature may

fall below freezing.

• Please ensure that when the appliance is installed it is easily

accessible for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To

help prevent vibration we recommend you place a waterproof wood

panel, at least 15 mm thick under the appliance, secured to at least 2

floor beams with screws. If possible install the appliance in one of the

corners of the room, where the floor is more stable.

Levelling the Appliance

• The appliance must be levelled using the adjustable feet.

• Adjust the feet using the spanner provided.

• Ensure the spanner is securely pushed onto the hex head on the feet

of the appliance.

• Adjust the feet so that the appliance is level. The appliance must not

rock when weight is applied.

• Check the appliance level using a spirit level.

• Never use strips or shims of wood or cardboard etc to compensate for

any uneveness in the floor. Always use the adjustable feet.

Self Adjusting Foot

Appliances with a spin speed of 1400 r. p. m. and over have a self

adjusting foot fitted (rear right).

• If the appliance vibrates or is unstable during a spin cycle of

1400 r. p. m.: Set the three adjustable feet to length of 10 mm.

• If the self adjusting foot (rear right) does not reach the floor:

Manually extend the self adjusting foot to the required length.

Appliance Installation