AEG AWF9024P5SB User Manual - Page 15

Browse online or download pdf User Manual for Washer AEG AWF9024P5SB. AEG AWF9024P5SB 40 pages.

Print Page

3.5 Settings

Save Favourite (
Program settings that are frequently used
can be saved (e.g. Cotton, 60°C, 1200
rpm, with Prewash and Hygienic Care).
To program/re-program Favourite with
your own selections and save them,
proceed as follows:
1. Put machine in Stand-By mode.
2. Select your desired wash settings.
3. To save favourite program, press and
hold "Hygienic Care
about 2 seconds and you will hear
"Bip, Bip" sound and "
flashing on the display.
To recall the favourite wash program,
turn selector knob to "Favourite
program. You will get acknowledgement
on the display when the Favourite
program is loaded.
Child Safety Lock (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to
the appliance.
Set this option after pressing the
Start/Pause touchpad.
To set "Child Lock" option:
●
To activate the function, press and
hold "Prewash" touchpad about
2 seconds until the display shows the
icon "
".
If you press any touchpad while
Child Lock is activated, the icon
"
" will flash on display
3 times along with buzzer sound.
The touchpads are locked
(except for the On/Off button).
This function remains enabled
even after the appliance is
switched off.
) Program
" touchpad
" is
"
) Option
●
To deactivate the function, press and
hold "Prewash" touchpad about
2 seconds until the display shows the
icon "
".
Enabling/Disabling End-Of-Wash
Buzzer
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finished approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as critical
faults are not disabled.
●
To disable the buzzer sound, press
"Spin and Hygienic Care (
touchpads at the same time about
3 seconds, the icon "
on display along with buzzer sound.
●
To return to default configuration press
these 2 touchpads at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
15
)"
" will show
" will