Fujitsu Lifebook B3020D Bios Manual - Page 7
Browse online or download pdf Bios Manual for Laptop Fujitsu Lifebook B3020D. Fujitsu Lifebook B3020D 29 pages. Lifebook b series
Also for Fujitsu Lifebook B3020D: Bios Manual (38 pages)
Print Page
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
n
Heads:
A number between
1 and 16
n
Sectors:
A number between
0 and 63
n
Maximum
Display only
Capacity:
n
Multi-Sector
Disabled
Transfers:
n
2 Sectors
n
4 Sectors
n
8 Sectors
n
16 Sectors
n
LBA Mode
Disabled
Control:
n
Enabled
n
Transfer Mode:
Standard
n
Fast PIO 1
n
Fast PIO 2
n
Fast PIO 3
n
Fast PIO 4
n
Multiword DMA 1
n
Multiword DMA 2
n
Ultra DMA
Disabled
Mode:
n
Mode 0
n
Mode 1
n
Mode 2
n
Mode 3
n
Mode 4
n
Mode 5
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
press [F10] to exit and save. If you wish to move to another menu, use the cursor keys.
Default
Description
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]), by typing
in the number, or using the "+" and "-" keys.
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]), by typing
in the number, or using the "+" and "-" keys.
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type is iden-
tified as hard disk.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is
selected.
[Multiword
Selects the method for moving data to/from the drive. Autotype the
DMA 2]
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
[Mode 5]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
Esc
M a i n M e n u
] key, use the cursor keys to go to the Exit menu, or
7