Fujitsu Lifebook C2310 Bios Manual - Page 13

Browse online or download pdf Bios Manual for Laptop Fujitsu Lifebook C2310. Fujitsu Lifebook C2310 31 pages. Lifebook c series
Also for Fujitsu Lifebook C2310: Software Manual (39 pages)

Print Page

Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu

Menu Field

Options

Serial Port:

• Disabled

• Enabled

• Auto

I/O Address:

• 3F8 - 3FF

• 2F8 - 2FF

• 3E8 - 3EF

• 2E8 - 2EF

Interrupt:

• IRQ 3

• IRQ 4

• IRQ 10

• IRQ 11

Infrared Port:

• Disabled

• Enabled

• Auto

Mode:

• IrDA

• FIR

I/O Address:

• 3F8 - 3FF

• 2F8 - 2FF

• 3E8 - 3EF

• 2E8 - 2EF

Interrupt:

• IRQ 3

• IRQ 4

• IRQ 10

• IRQ 11

Default

Description

[Enabled]

When [Enabled] is selected, the port is on. When [Dis-

abled] is selected, the serial port is turned off. When [Auto]

is selected, the Plug & Play feature configures the port.

Note that for systems running Windows XP, this legacy

port is not supported without additional device-specific

drivers.

[3F8 - 3FF]

Select the I/O address for the serial port.

(Note that if there is a conflict between the port interrupts

or addresses, asterisks will appear adjacent to the affected

port names to alert you to the fact. In that case, make a

different selection.)

[IRQ 4]

Allows user to set the infrared port base I/O address when

the serial port is Enabled.

(Note that if there is a conflict between the port interrupts

or addresses, asterisks will appear adjacent to the affected

port names to alert you to the fact. In that case, make a

different selection.)

[Enabled]

When Disabled, the infrared port is off; when Enabled, the

infrared port is on. When Auto is selected, the Plug & Play

operating system configures the port.

[FIR]

Select the mode for the infrared port: Infrared or Fast Infra-

red.

[2E8 - 2EF]

Allows user to set the infrared port base I/O address when

the infrared port is Enabled.

(Note that if there is a conflict between the port interrupts

or addresses, asterisks will appear adjacent to the affected

port names to alert you to the fact. In that case, make a

different selection.)

[IRQ 3]

Allows user to set the infrared port interrupt when the

infrared port is Enabled.

(Note that if there is a conflict between the port interrupts

or addresses, asterisks will appear adjacent to the affected

port names to alert you to the fact. In that case, make a

different selection.)

A d v a n c e d M e n u