Fujitsu Lifebook C2330 Bios Manual - Page 6

Browse online or download pdf Bios Manual for Laptop Fujitsu Lifebook C2330. Fujitsu Lifebook C2330 31 pages. Lifebook c series
Also for Fujitsu Lifebook C2330: Software Manual (39 pages)

Print Page

L i f e B o o k C S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA

devices are installed.

Main

Type:

Total Sectors:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Type:

• Auto

• None

• CD-ROM

• Hard Disk

CHS Format (Cylinders, Heads, Sectors)

Cylinders:

• A number

between 0 and

65,535

Heads:

• A number

between

1 and 16

PhoenixBIOS Setup Utility

Primary Master [FUJITSU MHT2040AT-(PM)]

[Auto]

LBA Format

78140160

40008MB

[16 Sectors]

[Enabled]

[Multiword DMA 2]

[Disabled]

Select Item

Select Menu

Figure 2. Primary Master Submenu

Default

[Auto]

–—

*Note that actual hard drive label shown may vary.

Depending on the drive type, information such as cylinders,

heads and sectors may also be displayed.

-/Space

Change Values

Enter

Select

Sub-Menu

Description

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. Select CD-ROM if a

CD-ROM drive is installed at this connection. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and Sec-

tors for the drive.

This appears only when Hard Disk is selected. When Hard Disk is

selected, you can change the value. This field is incremented by

pressing the [Spacebar]). This field is decremented by pressing the [-

] key. You can also change the field by typing in the number.

This appears only when Hard Disk is selected. When it is selected,

you can change the value. This field is incremented by pressing the

[Spacebar]). This field is decremented by pressing the [-] key. The

field can also be changed by typing in the number.

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Setup Defaults

F10

Save and Exit