Brother P-touch E550WVP Quick Setup Manual - Page 8

Browse online or download pdf Quick Setup Manual for Label Maker Brother P-touch E550WVP. Brother P-touch E550WVP 47 pages.

INTRODUCTION
Rechargeable Li-ion Battery
Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter
referred to as "rechargeable battery"). If these precautions are not followed, overheating,
leaking, or cracks in the battery may result in an electrical short, explosion, smoke, fire,
electric shock, injury to yourself or others, or damage to the product or other property.
Use the rechargeable battery only for its
intended purpose. The P-touch labeling
system and rechargeable battery are
designed to function exclusively with
each other. DO NOT insert the
rechargeable battery into a different P-
touch labeling system, or a different
rechargeable battery into your P-touch
labeling system, otherwise fire or
damage may result.
To charge the rechargeable battery,
insert it into the P-touch labeling
system, and then use the AC adapter
designed specifically for this P-touch
labeling system.
DO NOT charge the rechargeable
battery near a fire or in direct sunlight.
This could activate the protection
circuitry, which is designed to prevent
danger from high heat. Activation of the
protection circuitry could cause
charging to stop, charging to occur with
excessive current/voltage if the
protection circuitry fails, or an abnormal
chemical reaction within the battery.
When charging the rechargeable
battery, use only a battery charger
designed specifically for the
rechargeable battery.
DO NOT allow wires or other metal
objects to come into contact with the
terminals of the rechargeable battery.
DO NOT carry or store the rechargeable
battery with metal objects such as
necklaces or hairpins. This could cause
an electrical short, and lead metal
objects such as wires, necklaces, or
hairpins to overheat.
8
DANGER
DO NOT use or leave the rechargeable
battery near fire, heaters, or other high
temperature (above 80
locations.
DO NOT allow the rechargeable battery
to come into contact with or to be
immersed in water.
DO NOT use the rechargeable battery
in corrosive environments, such as
areas where salty air, salt water, acids,
alkalis, corrosive gases, chemicals, or
any corrosive liquid are present.
DO NOT use the rechargeable battery if
it is damaged or leaking.
DO NOT directly solder any connections
to the rechargeable battery. This could
cause internal insulation to melt, gas to
be emitted, or safety mechanisms to fail.
DO NOT use the rechargeable battery
with the polarity (+) (-) reversed. Check
the orientation of the rechargeable
battery before inserting it, and do not try
to force the rechargeable battery into
the P-touch labeling system. Charging
the rechargeable battery with the
polarity reversed could cause an
abnormal chemical reaction within the
rechargeable battery or abnormal
current flow during discharge.
DO NOT directly connect the
rechargeable battery to a household
electrical supply.
°
°
C/176
F)