Brother P-touch H500 Quick Setup Manual - Page 26

Browse online or download pdf Quick Setup Manual for Label Maker Brother P-touch H500. Brother P-touch H500 36 pages.

Print Page

GETTING STARTED

Close the rear cover.

If you cannot attach the rear cover, check to ensure

the white lever is in the up position. If not, lift the

lever, and then attach the cover.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink

ribbon to be discharged with the tape. The tape may no longer be functional

after the ink ribbon discharges.

• Store tape cassettes in a cool dark location, away from direct sunlight and high

temperature, high humidity, or dusty locations. Use the tape cassette as quickly as

possible after opening the sealed package.

Extra Strength Adhesive Tape:

• For textured, rough, or slipping surface, we recommend using Extra Strength Adhesive Tape.

• Although the instruction sheet included with the Extra Strength Adhesive Tape

cassette recommends cutting the tape with scissors, the tape cutter that this P-touch

is equipped with is able to cut Extra Strength Adhesive Tape.

Press the Power key to turn the P-touch on.

Press the Power key again to turn the P-touch off.

• Your P-touch has a power saving function that automatically turns itself off if no key

is pressed within a certain time, under certain operating conditions. Refer to the

"Auto Power-Off Time" for details.

• If the batteries are installed or the P-touch is connected to an electrical outlet by the

AC adapter, the previous session's information is displayed when the power is turned

on.

If you use the AC adapter or Li-ion battery, you can change the setting of the auto power-off time.

When you use alkaline batteries or Ni-MH batteries, the auto power-off time cannot be

changed. (The time is fixed to 20 minutes.)

Press the Menu key, select "Auto Power Off" using the

the OK or Enter key.

Select the battery shown on the LCD display by using the

value using the

"AC Adapter" or "Li-ion Battery" can be selected.

Press the OK or Enter key.

Turning Power On/Off

key.

key, and then press

key and set the