Fujitsu LIFEBOOK E733 Disassembly Instruction - Page 2
Browse online or download pdf Disassembly Instruction for Laptop Fujitsu LIFEBOOK E733. Fujitsu LIFEBOOK E733 32 pages.
Also for Fujitsu LIFEBOOK E733: Getting Started (7 pages)
Print Page
Disassembly Instruction
LIFEBOOK E733
Notes on installing and removing boards and components
Before removing any individual modules, always switch the computer off first and
!
disconnect it from the mains supply and remove all cables. After the main power cable
has been disconnected, discharge the remaining voltage by pressing the power on
button.
The workplace must be designed in accordance with the guidelines of the European
Federation of Trade Unions.
Only professional quality tools must be used.
■
Switch the computer off and pull the power plug out of the mains socket.
■
Remove the cables.
■
After the main power cable has been disconnected, discharge the remaining voltage by pressing the power on button.
■
Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
Boards with electrostatic sensitive devices (ESD] are marked with the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances, observe the following points:
■
You must statically discharge yourself before working with boards (e.g. by touching a grounded object].
■
The equipment and tools you use must be free of static charges.
■
Remove the power plug from the mains supply before inserting or removing boards containing ESDs.
■
Always hold boards with ESDs by their edges.
■
Never touch pins or conductors on boards fitted with ESDs.
For more information about ESD please refer to the Computer based Training "ESD in electronics"
(http://docs.ts.fujitsu.com/dl.aspx?id=b09289e9-65b3-401b-ac1f-c87d05f02d92].
Keep in mind SB-PC-11009:
The current available EDSD (EGB] regulations must be obeyed.
It is not allowed to connect or disconnect any cables or components within a system, while the main power cable is plugged. After the main
power cable has been disconnected, please discharge the remaining voltage by pressing the power on button. After that it is save to work on the
internal components.
Page 2 of 32
partners.ts.fujitsu.com