AEG L 74489 WVFL User Manual - Page 14
Browse online or download pdf User Manual for Washer AEG L 74489 WVFL. AEG L 74489 WVFL 28 pages.
14
www.aeg.com
To deactivate/activate the acoustic
signals, press Flecken and Extra Spülen
at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
7.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp. and U./Min. at the same
time until the indicator
goes off.
8. OPTIONS
8.1 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.2 Start/Pause
Press button Start/Pause to start or
interrupt a programme.
8.3 Zeitvorwahl
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.4 Zeit Sparen
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for slightly soiled items
only.
Some programmes accept
only one of the two options.
You can activate this option:
• After you press Start/Pause : the
options and the programme knob are
locked.
• Before you press Start/Pause : the
appliance cannot start.
7.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Zeitvorwahl and Zeit Sparen at
the same time until the indicator Extra
comes on/
Spülen comes on/goes off.
8.5 Extra Spülen
With this option you can add some rinses
to some washing programmes, refer to
"Programme chart".
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
8.6 Flecken
Set this option to add the stain phase to
a programme.
Use this option for laundry with hard
stains to remove.
When you set this option, put the stain
remover into compartment
8.7 U./Min.
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
This option increases the
programme duration.
This option is not available
with a temperature lower
than 40 °C.
.