Fujitsu Lifebook N3510 User Manual - Page 29

Browse online or download pdf User Manual for Laptop Fujitsu Lifebook N3510. Fujitsu Lifebook N3510 48 pages. Lifebook n series
Also for Fujitsu Lifebook N3510: Getting Started (2 pages), Bios Manual (21 pages)

Print Page

• Adjusting the volume

When the (+) button is pressed, the volume increases, while the (-) button is pressed, it

decreases.

Pressing the [Mute] button temporarily turns off audio. Pressing it again turns audio back on.

The volume adjusting button on the notebook can be used instead of the (+)/(-) button. When

the upper button is pressed, the volume increases, while the lower button is pressed, it

decreases.

Adjust the volume so that the sound from the speaker is not distorted. Failure to do

so could result in damage to the speaker.

Playing DVDs

Press the [MyMedia] button to display the main menu.

Insert the DVD you want to play into the optical drive of the notebook. Refer to the note-

book user's guide for additional information on using the optical drive and caring for

discs.

Select "DVD/CD" from the menu and press the [Enter] button. The DVD will start play-

ing automatically.

When playing a DVD that you were watching earlier, it will start to play from the position

determined by the Auto Resume setting. See "Changing the play settings for DVDs" on

page 30.

When "Start from beginning" is set, the disc will always restart at the beginning. When "Start

from last position" is set, the disc will start playing at the location where it previously stopped.

See "Changing the play settings for DVDs" on page 30

• Each region code is recorded on a DVD, so discs having region codes differ-

ent from the codes set by Instant MyMedia cannot be played. If you want to

play discs having different region codes, change the setting of region codes of

Instant MyMedia. See "Changing the region code" on page 30.

• If you want to play a DVD having a region codes different from the present

one, a message is displayed showing that play is not performed, or a warning

screen appears. If you want to play this DVD, eject the disc and change the

setting of region codes. When a message is displayed, press [Enter] to get rid

of the message, and perform the above operation for changing a region code.

Operations during play

• Pause

When you press the [Play/Pause] button during the play, play is temporarily stopped. When

you press the button again, play resumes.