Brother P-touch PT-P900 Product Safety Manual - Page 8
Browse online or download pdf Product Safety Manual for Label Maker Brother P-touch PT-P900. Brother P-touch PT-P900 15 pages. Electronic
Print PageP-touch Label Printer
Store the P-touch Label Printer on a flat, stable surface, such as a desk or in a drawer.
Always use the suggested AC adapter (AD9100ESA) for the P-touch Label Printer and plug it
into an outlet with the specified voltage. Failure to do so could result in damage or failure of the
P-touch Label Printer.
If you notice heat, an abnormal odor, discoloration of the P-touch Label Printer, deformation, or
anything else unusual while using or storing the P-touch Label Printer, immediately discontinue
the use of the P-touch Label Printer, disconnect the AC adapter (AD9100ESA), and remove the
battery.
DO NOT leave the P-touch Label Printer or any tape within the reach of young children.
DO NOT place any heavy objects on top of the P-touch Label Printer.
DO NOT use the P-touch Label Printer in places with high humidity or moisture, such as
bathrooms.
DO NOT allow the P-touch Label Printer to get wet, for example, by handling it with wet hands
or spilling beverages onto it.
DO NOT disassemble or modify the P-touch Label Printer.
AC adapter (AD9100ESA)
If you do not intend to use the P-touch Label Printer for an extended period of time, disconnect
the power cord from the electrical outlet.
When disconnecting the power cord from the electrical outlet, always hold the plug.
DO NOT overload an electrical circuit with the power cord.
DO NOT disassemble or modify the AC adapter.
DO NOT allow the AC adapter / power cord / plug to get wet, for example, by handling them with
wet hands or spilling beverages onto them.
Cutter
Follow these guidelines to avoid minor personal injury and damage to the P-touch Label Printer.
DO NOT open the tape compartment cover when operating the cutter unit.
DO NOT apply excessive pressure to the cutter unit.
Rechargeable Li-ion battery (Optional)
At the time of purchase, the rechargeable battery is slightly charged so that the operation of the P-touch
Label Printer can be verified; however, before you use the P-touch Label Printer for the first time, you
must fully charge the battery using the AC adapter.
If the P-touch Label Printer will not be used for a long period of time, remove the rechargeable battery
from the P-touch Label Printer, and then store it in a location where it is not exposed to static electricity,
high humidity, or high temperatures (temperatures between 59F (15C) and 77F (25C) and humidity
between 40% and 60% are recommended). To maintain the efficiency and life of the rechargeable
battery, charge it at least every six months.
If you notice anything unusual about the rechargeable battery the first time it is used, for example
overheating or rust, STOP using the battery. Contact Brother customer service.
CAUTION
General Precautions
7