Fujitsu LifeBook P5010 Bios Manual - Page 5

Browse online or download pdf Bios Manual for Laptop Fujitsu LifeBook P5010. Fujitsu LifeBook P5010 26 pages. Lifebook p series
Also for Fujitsu LifeBook P5010: Specifications (2 pages)

Print Page
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
n
None
n
CD-ROM
n
Hard Disk
n
LBA Format
Total Sectors:
---
Maximum
---
Capacity:
CHS Format
Cylinders:
A number
n
between 0 and
65,535
PhoenixBIOS Setup Utility
Advanced
Security
Primary Master [HITACHI_DK23EA-40-(PM)]
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Mode 5]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
[Auto]
---
---
–—
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Power
Boot
Info
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
Description
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Set-up items do not appear. Select CD-ROM if a CD-ROM drive is installed
at this connection. If Hard Disk is selected, you must specify the number of
Cylinders, Heads, and Sectors for the drive.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
Cylinders/Heads/Sectors
This item is active only when Hard Disk is selected as the type. This field is
changed by incrementing (pressing the [Spacebar]) or by typing in the
number.
M a i n M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
5