Brother P-touch QL-710W Quick Setup Manual - Page 22
Browse online or download pdf Quick Setup Manual for Label Maker Brother P-touch QL-710W. Brother P-touch QL-710W 38 pages. Label printer
Also for Brother P-touch QL-710W: Network User's Manual (48 pages), Software User's Manual (48 pages), User Manual (23 pages), User Manual (23 pages)
Print Page
20
For wireless network interface users
Before You Begin
First you must configure the wireless
network settings of your printer to
communicate with your network access
point/router. After the printer is configured
to communicate with your access point/
router, computers on your network will
have access to the printer. To use the
printer from these computers, you will need
to install the drivers and software. The
following steps will guide you through the
configuration and installation process.
• If you are going to connect the printer
to your network, we recommend that
you contact your system
administrator prior to installation. You
must know your wireless network
settings before you proceed with this
installation.
• If you have previously configured the
printer's wireless settings, you must
reset the network settings before you
can configure the wireless settings
again.
1 Turn the power OFF.
2 Press and hold the Cut button
while holding down the ON/OFF
button. The Wi-Fi lamp starts
flashing green and the Status
lamp lights orange.
3 Press the Cut button twice while
holding down the ON/OFF button.
The Wi-Fi lamp lights green and
the Status lamp lights orange.
To achieve optimum results with
normal everyday document printing,
use the printer as close to the network
access point/router as possible with
minimal obstructions. Large objects
and walls between the two devices
as well as interference from other
electronic devices can affect the data
transfer speed of your documents.
Due to these factors, wireless may
not be the best method of connection
for all types of documents and
applications. The maximum
processing speed is possible when
using USB.
Infrastructure Mode
The following instructions are for
infrastructure mode (connected to a
computer through an access point/router).
4
1 Access point/router
2 Your printer
3 Wireless capable computer connected to the
access point/router
4 Wired computer connected to the access point/
router
5 Smartphone
Choosing Your Wireless Install
Method
The following instructions will offer two
methods for installing your printer in a
wireless network environment. Choose the
method you prefer for your environment.
To set up your printer in any other
wireless environment, refer to the
Network User's Guide.
Method 1
Configuration using the Installer
CD-ROM and temporarily using
a USB cable
It is recommended that you use a
computer wirelessly connected to your
network for this method.
5
1
2
3