AEG L 76270 SL User Manual - Page 4

Browse online or download pdf User Manual for Washer AEG L 76270 SL. AEG L 76270 SL 32 pages.

Print Page

www.aeg.com

Water connection

• Do not connect the appliance with old

hoses already used. Only use new ho-

ses.

• Make sure not to cause damage to the

water hoses.

• Do not connect the appliance to new

pipes or pipes not used for a long

time. Let the water flow for some mi-

nutes, then connect the inlet hose.

• The first time you use the appliance,

make sure that the water hoses and

the couplings do not have leakages.

Electrical connection

• Make sure that the appliance is earth-

ed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply.

• Always use a correctly installed shock-

proof socket.

• Do not use multiple plugs and exten-

sion cables. There is a risk of fire.

2. TECHNICAL INFORMATION

Dimensions

Electrical connection:

Level of protection against ingress of solid particles

and moisture ensured by the protective cover, ex-

cept where the low voltage equipment has no pro-

tection against moisture

Water supply pressure

Water supply

Maximum load

Spin speed

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

Width / Height / Depth

Total depth

Voltage

Overall power

Fuse

Frequency

Minimum

Maximum

Cotton

Maximum

• Do not replace or change the mains

cable. Contact the service centre.

• Make sure not to cause damage to the

mains plug and cable.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

1.5 Discard the appliance

Disconnect the mains plug from the

mains socket.

Cut off the mains cable and discard

it.

Discard the door catch. This pre-

vents children or pets to be closed

in the appliance. There is a risk of

suffocation (only for front-loading

appliances).

600 / 850 / 430 mm

487 mm

230 V

2000 W

10 A

50 Hz

IPX4

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

Cold water

6.5 kg

1200 rpm