Brother P-touch RL-700S User Manual - Page 12
Browse online or download pdf User Manual for Label Maker Brother P-touch RL-700S. Brother P-touch RL-700S 24 pages. Rfid label printer
Print Page
Before Use
Button
Button functions are as follows:
Button
ON/OFF button (
Feed and Cut button (
Open Cover button
Lamp Display
The ON/OFF button lamp (blue) and Error lamp (red) indicate the current operating status.
Lamp Status
ON/OFF
Error Lamp
Button (Blue)
(Red)
Not lit
Not lit
Lit
Not lit
Flashing
Not lit
Flashing
Lit
Lit
Flashing
Flashing
Lit
Rapidly
Flashing Very
Lit
Rapidly
12
Turns the printer on and off.
)
Feeds and cuts the printed labels.
Use this button when the auto cut option in the printing dialog
)
box is not checked.
* Unable to use when SZ tape is loaded.
Opens the cover.
• The printer is off.
• The printer is working normally.
• The printer is receiving data from the computer.
Wait for a while.
• The printer is receiving data from the computer, but unable
Lit
to print.
Load a tape cassette and close the cover.
• No tape cassette is loaded, or the cover is open.
Load a tape cassette and close the cover.
• The Feed and Cut button was pressed when SZ tape is
loaded. (Unable to use the Feed and Cut button when SZ
Lit
tape is loaded.)
• You reached the end of the SZ tape. Remove the SZ tape
cassette and check the surface of the tape. If "END" is
printed on the tape, replace the cassette with a new SZ
tape cassette.
• A print job is received, but the printer cannot print. Load the
correct tape cassette and close the cover.
• If ERROR is printed on the SZ tape, an error occurred
when writing data to the RFID tag or the tag is damaged.
Try printing again.
• Make sure that the tapes are not jammed in the printer.
Turn the printer off and on.
* If the problem is not solved, contact your dealer or
authorized service center.
• Turn off the printer, and then turn it on again.
* If the problem is not solved, contact your dealer or
authorized service center.
Function
Printer Status