Fujitsu LifeBook Q2010 Bios Manual - Page 6

Browse online or download pdf Bios Manual for Laptop Fujitsu LifeBook Q2010. Fujitsu LifeBook Q2010 27 pages. Lifebook q2000 series

Print Page
L i f e B o o k Q 2 0 0 0 S e r i e s B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Options
■
Type:
Auto
■
None
LBA Format
Total Sectors:
___
Maximum Capacity:
___
Multi-Sector Transfers:
___
LBA Mode Control:
___
Transfer Mode:
___
Ultra DMA Mode:
___
6
PhoenixBIOS Setup Utility
Drive0 [TOSHIBA MK6006GAH]
[Auto]]
LBA Format
117210240
60012MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Drive0 Master Submenu
Default
Description
[Auto]
Selects the hard drive device type. Select Auto to have the type automatically
identified by the BIOS at POST. If None is selected, all of the following Setup
items do not appear.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
[16 Sectors]
This option cannot be changed when Auto is selected; it is automatically
selected.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This option cannot be changed when Auto is selected; it is auto-
matically selected.
[Multiword
This option cannot be changed when Auto is selected; it is automatically
DMA 2]
selected. Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
[Disabled]
This option cannot be changed when Auto is selected; it is automatically
selected. Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Setup Defaults
Select
Sub-Menu
F10
Save and Exit