AEG L 87695 WD User Manual - Page 12
Browse online or download pdf User Manual for Washer AEG L 87695 WD. AEG L 87695 WD 44 pages.
Print Page
12 www.aeg.com
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
THE STAIN-PREWASH
BUTTON
Press button
prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related sym-
bol and the indicator bar comes on in the
display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the programme
duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high level
of soil.
The set of this function increases
the programme duration.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
9
to add rinsing phases to
9
10
to add the stain and/or a
10
11
The appliance does not drain the water
when the programme is completed.
TEMPERATURE BUTTON
Press button
temperature. When the display shows
- -, the appliance does not heat the water.
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
and button
12
til the display shows the symbol
• To deactivate the function, press but-
ton
12
and button
until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
6
: the appliance cannot start.
• After you press the Start/Pause button
, all the buttons and the programme
6
knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
8
and button
til the display shows the symbol
12
to change the default
10
and button
at the same time un-
11
11
at the same time
goes off.
7
at the same time un-
12
9
at
.
.