AEG L 88409 FL2 User Manual - Page 19
Browse online or download pdf User Manual for Washer AEG L 88409 FL2. AEG L 88409 FL2 32 pages.
Print Page
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
8.7 Interrupt a programme
1.
Press button
4
flashes.
2.
Press button
4
programme continues.
8.8 Cancel a programme
1.
Press button
1
gramme and to deactivate the appli-
ance.
2.
Press button
1
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
8.9 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
flashes.
2.
Change the function set.
8.10 Open the door
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
symbol in the display goes off.
2.
Open the appliance door.
3.
Close the appliance door and press
button
. The programme or the
4
delay start continues.
. The indicator
again. The washing
to cancel the pro-
again to activate
. The indicator
. The door lock
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
8.11 At the end of the
programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
goes off.
• The door lock symbol goes off.
• Press button
to deactivate the ap-
1
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appliance
again, the display show the end
of the last set programme. Turn
the programme knob to set a
new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
ENGLISH
19
comes on.