• If multiple QL printers are connected to the network, select the QL printer to print with. A list of
the QL printers connected to the network can be displayed by clicking
[Printer Setup...]. You can find the desired printer in the list from its IP address.
• The IP address of QL printers can be checked by printing the printer set-up information. Press
and hold down the Cut button when the power is on to print the printer set-up information.
• We recommend that you set the printer location using BRAdmin because it enables you to view
the printer in the list.
4
Label View
Display
This label view is displayed when the software is started. The width of tape currently
set is displayed on the left of label image. When "Auto" is shown on the right, the
length of tape is automatically adjusted to the length of text.
You can drag the label border to manually change the length and width of the label.
Move the pointer to the label area's border. When the blue line appears, drag to the
desired length or width.
You can adjust the size of the P-touch Editor Lite LAN window. Simply move the
pointer over an edge of the P-touch Editor Lite LAN window and drag to adjust the
size once the pointer changes to an arrow.
Guidelines are sometimes displayed when moving objects. They are shown when
the object is aligned at the left, right, top, or bottom edge of Printable area, or in the
center. In the illustration to the left, the guidelines indicate that the object is centered
at the top edge of the tape.
Inserted text boxes, images, and frames are treated as objects. Objects are
surrounded by handles (indicated by eight blue points).
Indicates that an object is selected.
The pointer changes to an arrow when moved over a handle. You can change the
size of the object by dragging.
You can move objects by dragging when the pointer is a crosshair. For text objects,
the pointer only changes to a crosshair over the border of the object.
Function
33
2
and then clicking
4
Print Page