AEG L6FBE740G User Manual - Page 9

Browse online or download pdf User Manual for Washer AEG L6FBE740G. AEG L6FBE740G 36 pages.

Print Page

2. On the edge of a sink - Fasten the

guide to the water tap or to the wall.

Make sure that the plastic

guide cannot move when

the appliance drains.

Make sure that the drain

hose end is not immersed in

the water. There may be a

return of dirty water into the

appliance.

3. To a stand pipe with vent-hole -

Insert the drain hose directly into a

drain pipe. Refer to the illustration.

The end of the drain hose

must always be ventilated ,

i.e. the inner diameter of the

drain pipe (min. 38 mm -

min. 1.5") must be larger

than the external diameter

of the drain hose.

4. If the end of the drain hose looks like

this (see the picture), you can push it

directly into the stand pipe.

5. Without the plastic hose guide: Put

the drain hose in the spigot and

tighten it with a clip. Refer to the

illustration.

Make sure that the drain

hose makes a loop to

prevent particles going into

the appliance from the sink.

6. Position the hose directly to a built-in

drain pipe in the room wall and

tighten it with a clip.

You can extend the drain hose to

maximum 400 cm. Contact the

authorized service centre for the other

drain hose and the extension.

ENGLISH