Brother QL-800 Quick Setup Manual - Page 4

Browse online or download pdf Quick Setup Manual for Label Maker Brother QL-800. Brother QL-800 10 pages. Dk label. dk tape
Also for Brother QL-800: Quick Setup Manual (10 pages), Product Safety Manual (11 pages)

Print Page

3. Loading the DK Roll

Make sure that the label printer is

turned off. Hold the printer by

the front, and firmly lift the

DK Roll Compartment Cover

to open it. Remove the protective

sheet from the Label Output Slot.

IMPORTANT

• Do not throw away the protective sheet.

• When the printer is not in use, lift the DK Roll Compartment Cover and remove

any DK Rolls from inside the printer. Reinsert the protective sheet into the Label

Output Slot to maintain good printing quality.

Place the DK Roll into the Roll

Spool Guide.

• Make sure that the Roll Spool Arm is

inserted firmly in the Roll Spool

Guides.

• Make sure the stabiliser (1) slides into

the notch of the printer.

Thread the DK Roll through the

printer.

• Align the edge of the DK Roll with the

upright edge of the Label Output Slot.

• Insert the first label into the slot inside

the compartment.

• Push the label through the Label

Output Slot until the end reaches

the mark, as shown.

Protective

Sheet

3. Loading the DK Roll (cont)

Close the DK Roll Compartment Cover.

When you press the Power ( ) Button to turn

the printer on, the end of the DK Roll aligns

automatically.

IMPORTANT

• Do not leave any printed labels in the printer. Doing so will cause the labels to

jam.

• When not in use, close the DK Roll Compartment Cover to prevent dust and

debris from gathering in the printer.