Fujitsu BS2000 SE Series Manual - Page 18

Browse online or download pdf Manual for Server Fujitsu BS2000 SE Series. Fujitsu BS2000 SE Series 42 pages. Server unit x86
Also for Fujitsu BS2000 SE Series: Quick Manual (43 pages), Operating Manual (22 pages), Operating Manual (20 pages), Operating Manual (25 pages)

Print Page

Booting the BS2000 on an SU /390

To load BS2000, enter

LOAD FRAME: DETAIL-1 frame will appear.

You can start execution of IPL with the entries in this frame.

The frame shows, among other things, the (current and preset) load device (also called

IPL or boot load device) of BS2000. As the Server Unit was rebooted, the IPL load

device from the auto IPL configuration is set. This can differ from the IPL load device of

the last IPL. If necessary, select a different load device under

Take note of the setting for

set. In VM2000 mode,

In Native BS2000 mode, a blank must be entered there.

In VM2000 mode, switch to the PROGRAM LOAD FRAME: DETAIL-2 if necessary

using [PF9] in order to check the settings for loading the VM2000 firmware.

In VM2000 mode,

For

key.

FUNCTION ==> ld

Initial startup from the IPL load device requires a DIALOG startup.

FUNCTION ==> 3

PARMS ==> 1

VM MODE ==> 2

LOAD FUNCTION ==>

Powering on, starting up BS2000, powering off

and press the Enter key. The PROGRAM

must be selected for this purpose.

. This depends on the BS2000 operating mode

PARMS ==>

must be set.

must be set there.

select one of the functions

IPL-DEVICE

and press the Enter

LOAD

START

U41857-J-Z125-2-76

LOAD