Fujitsu ETERNUS DX Disk User Manual - Page 35

Browse online or download pdf User Manual for Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 42 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 6

Setting Up the VMware ESX Server

6.2

For VMware Infrastructure 3

Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as

follows and click [Close].

If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-

tion process for each iSCSI port. (Repeat

6.2.5

Setting CHAP Authentication

For VMware ESX connections, the ETERNUS DX Disk storage system uses a one-way CHAP authentication to

authenticate the Software Initiator access.

Perform the following settings to enable CHAP authentication.

Select the [Configuration] tab on VMware Infrastructure Client and select [Storage Adapters].

Select the target iSCSI Software Adapter and click [Properties].

Select the [CHAP Authentication] tab and click [Configure].

Select the [Use the following CHAP credentials] radio button.

Set arbitrary user name during the CHAP authentication.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

Step 7

through

Step

9.)

ESX

P3AM-3412-13ENZ0