Fujitsu ETERNUS DX Disk Configuration Manual - Page 14

Browse online or download pdf Configuration Manual for Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Fujitsu ETERNUS DX Disk Configuration Manual

Chapter 1

Setup Procedure for Emulex Converged Network Adapter Cards

1.2

Setting Up the Converged Network Adapter Cards

Select a boot device startup method (via WWPN or via DID). From the list of LUNs recognized by the

device, select the LUN number whose setting is to be changed, input the number for "Enter a Selec-

tion:"and press the [Enter] key.

LUN: 00 is used for SAN Booting, so input "01" and press the [Enter] key in this example.

-------------------------------------------------------------------------------

01:

Mem Base:

Port Name:

Vlan ID:

-------------------------------------------------------------------------------

DID:xxxxxx WWPN:xxxxxxxx xxxxxxxx

01.

-------------------------------------------------------------------------------

===> 01

Set the "Boot number". Select the boot device startup method (via WWPN or via DID), and change the

setting.

Input "Boot this device via WWPN" for WWPN in this example.

---------------------------------------------------

Press <Alt E> to go to Emulex BIOS Utility.

Press <s> to skip Emulex BIOS.

---------------------------------------------------

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

Emulex OneConnect FCoE BIOS Utility, xxxxxxxx

OCexxxxx-F:

CD4C0000

Firmware Version:

xxxxxxxx xxxxxxxx

xxxx

DCBX mode:

CEE mode

LUN:00

FUJITSU ETERNUS_DX400

Enter <ESC> to Exit

< / > to Highlight, <Enter> to Select

DID:xxxxxx WWPN:xxxxxxxx xxxxxxxx LUN:00

Boot this device via WWPN

Boot this device via DID

<ESC> to Previous Menu

< / > to Highlight, <Enter> to Select

===> Boot this device via WWPN

Bus#: xx Dev#: xx Func#: xx

xxx.xxx

BIOS: Enabled!

Node Name:

xxxxxxxx xxxxxxxx

0000

<PageDn> to NextPage

xxxxxxxx

ESX

P3AM-4772-11ENZ0