Fujitsu ETERNUS DX Disk Configuration Manual - Page 21

Browse online or download pdf Configuration Manual for Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 2

Setup Procedure for QLogic Converged Network

Adapter Cards

This chapter describes how to set up the VMware ESX server and driver when connecting the ETERNUS DX

storage systems to the server via QLogic Converged Network Adapter cards.

2.1

Setting Up the Converged Network Adapter Cards

Install the Converged Network Adapter cards, acquire their physical addresses and WWN information.

"2.2.1 Setting Up the Converged Network Adapter Cards" (page 23)

•

Setting Up SAN Boot

Set up the SAN Boot configuration (if SAN Boot is to be used).

"2.2.2 Setting Up SAN Boot" (page 26)

•

Installing VMware ESX

Install the VMware ESX software.

"2.2.4 Installing VMware ESX" (page 28)

•

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

ESX

P3AM-4772-11ENZ0