Fujitsu PRIMERGY 10/40GbE User Manual - Page 16

Browse online or download pdf User Manual for Server Fujitsu PRIMERGY 10/40GbE. Fujitsu PRIMERGY 10/40GbE 23 pages. Connection blade 18/8+2

Print Page
Schedule information
Host database information

4.2 IBP Mode

Item
Switching method
Port information
ETHER port
Data transfer rate
Full/half duplex
Flow control
Uplink Set
Port Group
VLAN Port Group
Service LAN
Service VLAN
Link State
Link aggregation
Load balancing algorithm
Back up port
Port selection scheme
LLDP
Broadcast/Multicast storm control
Converged Enhance Ethernet
Output rate control
Reflective Relay
IGMP snooping
MLD snooping
IEEE802.1X authentication
MAC address authentication
RADIUS client
TACACS+ client
LDAP Client
IP interface
Password information
User name
Password
ACL information
SNMP information
DHCP/DNS client
telnet/SSH auto logoff
Console auto logoff
System log information
System log send
Facility
Priority
Automatically current time set
Schedule information
Host database information
None
None
Default Setting
Cut through switching
1~18
19~26
(Downlink)
(Uplink)
10Gbps
10Gbps
Full-duplex
Full-duplex
(Fixed)
(Fixed)
Tx:OFF, Rx:ON
-
default
default
default
-
-
-
-
-
-
Enabled
Destination MAC address, Source MAC address
Master port preferred
Disabled
Enabled
Threshold value: 7.5Mpps
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
In-band = None/OOB = DHCP
admin
admin
None
Disabled
Enabled on oob
5 min
8 hours
Disable
23（local7）
error、warn、info
TIME or SNTP protocol advertised by DHCP server
None
None
Page 16 / 23
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
27,31
(Uplink)
（MMB connection link）
40Gbps
10/100Mbps
(Auto-detect)
Full-duplex
Auto-detect
(Fixed)
Tx:ON(Fixed)
Rx:ON(Fixed)
-
-
-
-
-
-
-
-
-
-
oob