Fujitsu PRIMERGY BX900 Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Server Fujitsu PRIMERGY BX900. Fujitsu PRIMERGY BX900 22 pages. Blade server systems, fibre channel connection blade

Print Page

Setting the Embedded Switch Module IP address

IP parameters are stored on the Embedded Switch Module. By default, the IP address for the Embedded Switch
Module is configured as DHCP.
NOTE
It is recommended that you set the IP address using the PRIMERGY BX900 Management Blade ServerView GUI
application because this enables centralized management of the Embedded Switch Module.
You can reset the IP address using one of the following methods:
•
Embedded Switch Module Command Line Interface (CLI). See
page 6 for instructions.
•
PRIMERGY BX900 Management Blade ServerView CLI. See
CLI to change system settings"
•
PRIMERGY BX900 Management Blade ServerView graphical user interface (GUI). See
BX900 Management Blade GUI to set the IP address"
ATTENTION
Do not connect the Embedded Switch Module to the internal network until the IP address is correctly set for your
Ethernet network requirements.

Using the CLI menu from the serial console

Use the following steps to connect and modify the Embedded Switch Module IP address through the PRIMERGY
BX900 Management Blade (MMB), regardless of whether you know the management IP address.
1. Disable any serial communication programs that are running on the management workstation.
2. Connect a serial cable from a management workstation to the MMB.
3. Open a HyperTerminal on a PC or TERM in a Linux or UNIX environment and establish a terminal session to the
Embedded Switch Module from the management workstation. You will use this connection if you want to reset
the module's IP address using CLI commands and perform other configuration tasks.
6 of 20
on page 10 for instructions.
on page 12 for instructions.
"Using the CLI menu from the serial console"
"Using the PRIMERGY BX900 Management Blade
Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02
on
"Using the PRIMERGY