Fujitsu PRIMERGY CX420 S1 System Configurator And Order-Information Manual - Page 18

Browse online or download pdf System Configurator And Order-Information Manual for Server Fujitsu PRIMERGY CX420 S1. Fujitsu PRIMERGY CX420 S1 21 pages.

Print Page
L
IX
Section
Communication / Network
2x Gigabit (Dualport) Ethernet Contr.
onboard
Intel LAN I350 (Powerville)
ext: 2x RJ 45 connector
A) 2-Port Copper PCIe Adapter 1000TX
S26361-F3740-E201
(D3035)
Gigabit Ethernet Controller Dual 1000TX LP
Eth Ctrl 2x1Gbit Cu PCIe x4 D3035 lp
Intel Powerville based 2 port Server Adapter
PCIe x4, Low Profile
ext: for RJ45-plug, Cat 5
max. 1x per CX272 S1
B) 4-Port Copper PCIe Adapter 1000TX
S26361-F3739-E201
(D3045)
Gigabit Ethernet Controller Quad 1000TX LP
Eth Ctrl 4x1Gbit Cu PCIe x4 D3045 lp
Intel Powerville based 4 port Server Adapter
PCIe x4, Low Profile
ext: for RJ45-plug, Cat 5
1-2x
max. 1x per CX272 S1
C) 10GbE 2-Port RJ45 for Cat 6
S26361-F3752-E202
Eth Ctrl 2x10GBase-T PCIe x8 X540-T2 lp
Intel Twinville based 2 port Server Adapter
PCIe x4, Low Profile
ext: for RJ45-plug, Cat 6
max. 2x per CX272 S1
D) 10GbE 2-Port SFP+ for MMF Module
S26361-F3629-E202
(D2755)
10 Gigabit Ethernet Contr. dual port SFP+
Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+
Intel Niantic based dual port 10Gb NIC
PCIe x8, Low Profile, full height (FH) bracket
ext: 2x SFP+ cage
max. 2x per CX272 S1
S26361-F3986-E3
SFP+ Module MMF 10GbE LC
SFP+ module for 10 Gbit
Ethernet 50µm FO cabling
ext:LC-SR-connector
max. 2x per controller
V:TWX Connector-PY
for all Twinax (FTS,BR,CI)
max. 2x per controller
S26361-F3989-E600 *)
SFP+ active twinax cable
customized twinax cable for
full rack setup ex factory
cable length is selected by
requirement in the factory
Fujitsu branded cable
max. 2x per controller
L1
PRIMERGY CX420 S1 / CX272 S1
The controller is delivered without SFP+ modules for optical cables, these must be
ordered separately. Without SFP+ modules copper twinax cables are supported.
The adapter is also available as loose delivery with
FH and LP bracket included: S26361-F3629-L502
S26361-F3986-E4
SFP+ Module SMF 10GbE LC
SFP+ module for 10 Gbit
Ethernet 9µm FO cabling
ext:LC-LR-connector
max. 2x per controller
S26361-F3873-E500 *)
SFP+ active twinax cable
customized twinax cable for
full rack setup ex factory
cable length is selected by
requirement in the factory
Brocade branded cable
max. 2x per controller
Fujitsu Technology Solutions x86 PRIMERGY Serve
System configurator and order-information guide
2x Gbit LAN on-board.
1x service LAN (either shared or dedicated)
The adapter is also available as loose delivery with
FH and LP bracket included: S26361-F3740-L501
The adapter is also available as loose delivery with
FH and LP bracket included: S26361-F3739-L501
The adapter is also available as loose delivery with
FH and LP bracket included: S26361-F3752-L502
The SFP+ Module is also available as loose delivery
S26361-F3986-L3
The SFP+ Module is also available as loose delivery
S26361-F3986-L4
Instead SFP+ Modules, SFP+ twinax cables from
the switch vendors may be used
S26361-F4571-E500 *)
SFP+ passive twinax cable
customized twinax cable for
full rack setup ex factory
cable length is selected by
requirement in the factory
Cisco branded cable
max. 2x per controller
separate orderable 10Gb Ethernet cables
S26361-F3989-L102
SFP+ aktives Twinax Kabel Fujitsu 2m
S26361-F3989-L105
SFP+ aktives Twinax Kabel Fujitsu 5m
S26361-F3989-L110
SFP+ aktives Twinax Kabel Fujitsu 10m
S26361-F3873-L501
SFP+ aktives Twinax Kabel Brocade 1m
S26361-F3873-L503
SFP+ aktives Twinax Kabel Brocade 3m
S26361-F3873-L505
SFP+ aktives Twinax Kabel Brocade 5m
S26361-F4571-L101
SFP+ passives Twinax Kabel Cisco 1m
S26361-F4571-L103
SFP+ passives Twinax Kabel Cisco 3m
S26361-F4571-L105
SFP+ passives Twinax Kabel Cisco 5m
S26361-F4571-L107
SFP+ aktives Twinax Kabel Cisco 7m
S26361-F4571-L110
SFP+ aktives Twinax Kabel Cisco 10m
Status 2013-12-30
*) in SA only
shown in
cabling view
18 of 21