Fujitsu PRIMERGY RX300 S8 Instructions Manual - Page 3
Browse online or download pdf Instructions Manual for Server Fujitsu PRIMERGY RX300 S8. Fujitsu PRIMERGY RX300 S8 31 pages. System configurator and order information guide
Also for Fujitsu PRIMERGY RX300 S8: Datasheet (12 pages)
Print Page
Configuration diagram PRIMERGY RX300 S8
System unit ( I )
with up to 6x 3.5" Hard disk drives
Motherboard
Memory CPU1
( Channel A + B + C )
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory CPU2
( Channel D + E + F)
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory (III )
rear side
1. PSU
2. PSU
Redundant power
supply option
Modular RAID
Support
Low-profile extension slots for:
SCSI Controller for backup( VII )
SAS Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Slot 6 PCIe-3 x16,
Slot 5 PCIe-3 x16, 390mm @ CPU2
Slot 4 PCIe-3 x8, max. 390mm @ CPU1
Possibility to install PCIe x16 cards
Slot 3 PCIe-3 x8, max. 390mm @ CPU1
Slot 2 PCIe-3 x8, max. 312mm @ CPU1
Slot 1 PCIe-3 x8, max. 168mm @ CPU1 white colored
Dedicated for modular on-board LAN-Controller
Slot 7 PCIe-3 x8, max. 168mm @ CPU1
Internal slot for modular RAID-Controller
Key:
Included in basic unit
One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.
Xeon DP
Xeon DP
Processor ( II )
Fan 1 - Fan 5
Redundant Fans
are standard!
Raid Card for IME, Raid 0 / 1E
Raid Card for Raid 5
210mm
@ CPU2
Option
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S8
front side
Bay for LocalView LCD
LSD
Air channel
Bay for 5,25"x 0,5" SATA-BR
or DVD-ROM/RW
Accessible drives ( V )
Needs space for 2
hard disk drives!
3.5"x1,6"
Backup drive option
Hard disk drives ( VI )
3.5" SAS/SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
3.5"x1" SAS or SATA
Status 2017-02-28
2 USB
VGA, LAN
Frontpanel
3 of 31