Fujitsu PRIMERGY SX650 Hardware Manual - Page 19

Browse online or download pdf Hardware Manual for Server Fujitsu PRIMERGY SX650. Fujitsu PRIMERGY SX650 29 pages. Storage blade

Print Page

3.2 Installing the internal hard disk

unit

Up to five internal hard disk units can be installed in this product.

This section explains how to install/remove an internal hard disk unit.

When an array system is configured, replacing a faulty internal hard disk unit and adding an internal

hard disk unit (hot-plug) can be performed during operation.

For details, refer to the manual in the array controller document & tools CD.

• When installing the internal hard disk unit, do not damage or modify the inner cables or the devices.

Doing so may cause a product failure, fire, or electric shock.

• Before handling the internal hard disk unit, first touch the metal chassis to discharge static electricity.

• The installation or dismantlement not described in this chapter is out of warranty.

• Do not remove the internal hard disk unit when the system is operating.

• Do not touch the surface of the baseboard or soldered area. Hold a baseboard by its edges or the

metal plate.

• Do not handle the internal hard disk unit roughly. Doing so may damage the internal data.

- Do not drop or damage the internal hard disk unit.

- Do not knock the internal hard disk unit on another internal hard disk unit, or other things.

- Avoid the contact of metallic materials with the internal hard disk unit.

• Do not put anything on the internal hard disk unit.

• Do not use a cell phone nearby.

• Do not operate or store this product in the following environments.

- Areas near magnets or exposed to magnetic fields

- Areas in direct sunlight or near heat sources

- Areas that experience extreme temperature and humidity changes

- Dusty or humid areas

- Areas exposed to shocks or vibration

• Do not move an internal hard disk unit that has already been installed to another disk bay.

• When putting an internal hard disk unit on a desk, be careful about the following.

- Do not drop or tip the internal hard disk unit when placing it on the desk.

- Do not put the internal hard disk unit directly on metallic materials.

- Do not put internal hard disk units close to one another.

- Do not pile the internal hard disk unit on top of one another.

- Do not stand the internal hard disk unit on its side.

PRIMERGY SX650 Storage Blade Hardware Guide