Fujitsu PRIMERGY TX150 S6 Service Supplement Manual - Page 11
Browse online or download pdf Service Supplement Manual for Server Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 pages.
Also for Fujitsu PRIMERGY TX150 S6: Notes On Using (8 pages)
Print Page
3
Safety notes
I
The following safety notes are also provided in the "Safety notes and
other important information" manual.
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
●
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
●
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
If the rack model is integrated in an installation that receives power
●
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
●
The server automatically sets itself to a voltage in the range of
100 V to 240 V. Make sure that your local voltage is within this range.
TX150 S6
Service Supplement
11