Fujitsu SPARC Enterprise M3000 Product Notes - Page 12
Browse online or download pdf Product Notes for Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38 pages.
Also for Fujitsu SPARC Enterprise M3000: Getting Started Manual (8 pages), Safety And Compliance Manual (34 pages), Product Notes (42 pages)
Print Page
Configuring XSCF for LDAP/SSL Support
The commands setldapssl(8) and showldapssl(8) let you set and view
LDAP/SSL configuration from the command line. These commands do for
LDAP/SSL what the setad(8) and showad(8) commands do for Active Directory,
and support many of the same parameters.
For more information, see the setldapssl(8) and showldapssl(8) man pages.
New proxyuser System Account
To support Active Directory and LDAP/SSL, this release features a new system
account named proxyuser. Verify that no user account of that name already exists.
If one does, use the deleteuser(8) command to remove it, then reset XSCF before
using the Active Directory or LDAP/SSL feature.
Supported Firmware and Software
The following firmware and operating system (OS) are supported depending on the
processors being installed on the SPARC Enterprise M3000 server..
TABLE 1
Installed Processors
SPARC64 VII processors
Note – XCP 1080 is the first XCP release for the SPARC Enterprise M3000 server.
Note – 8GB DIMM is supported in XCP 1081 or later.
For XCP, you can download the latest files of firmware at the following websites.
Global Site:
http://www.fujitsu.com/sparcenterprise/firmware/
4
SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010
Supported Firmware and Operating System Versions
XCP Version
2.52GHz
XCP 1080 or later
2.75GHz
XCP 1091 or later
Operating System Version
Solaris 10 5/08 or later, with required
patches
Solaris 10 10/08 or later