Fujitsu SPARC Enterprise M3000 Product Notes - Page 19
Browse online or download pdf Product Notes for Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42 pages.
Also for Fujitsu SPARC Enterprise M3000: Getting Started Manual (8 pages), Product Notes (38 pages), Safety And Compliance Manual (34 pages)
Print Page
Information About Hardware
This section describes the special instructions and the issues about the SPARC
Enterprise M3000 server hardware.
"Notes on the Use of 200V Power Supply" on page 9
■
"Notes on DVD Drive and Discs" on page 9
■
"Notes on the Use of USB Memory" on page 10
■
"Power Control and Operator Panel Mode Switch" on page 11
■
"Hardware Documentation Updates" on page 12
■
Notes on the Use of 200V Power Supply
For the servers that have the B-type plug, confirm that a 15A overcurrent protection
device is available outside the server. If not, prepare an external 15A overcurrent
protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The
B-type plug refers to plugs other than grounding-type ones with two parallel blades,
such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Notes on DVD Drive and Discs
See the "Notes on DVD Drives and Discs in SPARC Enterprise" on the website below
before using the CD/DVD discs in the standard DVD drive mounted in this server.
URL:
http://primeserver.fujitsu.com/sparcenterprise/manual/
Information About Hardware
9