Fujitsu SPARC Enterprise M9000 Product Notes - Page 17
Browse online or download pdf Product Notes for Server Fujitsu SPARC Enterprise M9000. Fujitsu SPARC Enterprise M9000 44 pages. For xcp version 1041
Also for Fujitsu SPARC Enterprise M9000: Getting Started Manual (4 pages), Features Manual (30 pages), Supplementary Manual (36 pages)
Print Page
Hardware Installation and Service Issues
This section describes hardware specific issues and workarounds.
Specific Issues and Workarounds
TABLE 1
Hardware Issues and Workarounds
TABLE 1
CR ID
Description
6433420
The domain console might display a Mailbox
timeout or IOCB interrupt timeout error during
boot.
6488846
During boot, the domain console might display
a checksum error for the SG(X)PCI2SCSIU320-
Z SCSI controller I/O card.
6557379
Power cables are not redundant on single
power feed servers without the dual power
feed option.
lists known hardware issues and possible workarounds.
Workaround
Issue a reset-all command from the OBP
(OK) prompt and reboot.
Check for the availability of the latest
controller card firmware.
On servers that have single power feed, all
power cables must be connected and powered
on at all times.
SPARC Enterprise M8000/M9000 Servers Product Notes
7