Fujitsu SPARC Enterprise T5120 Getting Started Manual - Page 3

Browse online or download pdf Getting Started Manual for Server Fujitsu SPARC Enterprise T5120. Fujitsu SPARC Enterprise T5120 12 pages. Sparc enterprise
Also for Fujitsu SPARC Enterprise T5120: Overview Manual (34 pages), Getting Started Manual (12 pages), Site Planning Manual (26 pages), Safety And Compliance Manual (34 pages)

Print Page
Fujitsu SPARC Enterprise T5120 Getting Started Manual
Configuration Information
TABLE 1
Time Zone
Select the time zone.
Date and Time
Accept the default date and time, or change the values.
root Password
Enter the root password twice. This password is for the superuser account
for the Solaris OS on this server. This password is not the SP password.

Quick Setup Instructions

1. Unpack the server, and check that you received all of the shipping contents (
2. Place the server in its intended location for verification.
For rackmounting instructions, refer to the instructions included with the rail kit, the service label on the
server, and to the online SPARC Enterprise T5120 and T5220 Servers Installation Guide.
3. Connect a serial cable between the server's SER MGT port (
This connection provides your initial communication with the SP.
The device must be set up to communicate using 9600 baud, 8 bit, no parity, 1 stop bit. A null modem
configuration is needed, meaning the transmit and receive signals are reversed (crossed over) for DTE to
DTE communications. You can use the supplied RJ-45 crossover adapters with a standard RJ-45 cable to
achieve the null modem configuration.
Server Connections
FIGURE 2
FIGURE 1
) and a terminal device.
FIGURE 2
).