Brother MFC-210C Quick Setup Manual - Page 6

Browse online or download pdf Quick Setup Manual for Fax Machine Brother MFC-210C. Brother MFC-210C 37 pages. Facsimile equipment
Also for Brother MFC-210C: Quick Setup Manual (37 pages), Quick Setup Manual (40 pages), Parts Reference List (30 pages)

Print Page
Brother MFC-210C Quick Setup Manual
Step 1
Removing the Protective
1
Parts
1
Remove the protective tape.
DO NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.

Loading Paper

2
You can load up to 100 sheets of 80 gsm
paper.
For more details, see "About paper" in
Chapter 1 of the User's Guide.
1
Pull the paper tray completely out of the
machine and remove the output paper tray.
2
Press and slide the paper guide to fit the
paper width.
Paper Side Guide
4

Setting Up the Machine

3
Pull out the paper support and unfold the
paper support flap.
Paper Support Flap
Use the paper support flap for Letter, Legal
and A4 size paper.
4
Fan the stack of paper well to avoid paper
jams and mis-feeds.
5
Gently insert the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark.
■ Make sure the paper side guides touch
the sides of the paper.
■ Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause paper feed problems.
6
Put the output paper tray back on and push
the paper tray firmly back into the machine.
Paper Support