Fujitsu 5530C2 - fi - Document Scanner Getting Started - Page 16

Browse online or download pdf Getting Started for Scanner Fujitsu 5530C2 - fi - Document Scanner. Fujitsu 5530C2 - fi - Document Scanner 28 pages. Color departmental scanner
Also for Fujitsu 5530C2 - fi - Document Scanner: Specifications (2 pages)

Print Page

5. Click [INSTALL PRODUCTS], and then click

[ISIS Driver].

6. Error Recovery Guide Installation dialog box

appears.

Error Recovery Guide is an application with

which you can view on-screen information for

troubleshooting errors that may occur in the

scanner. This guide helps solve problems, so

select [Yes] to install it. You may also choose

to install it later.

After you select [Yes] for installing Error

ATTENTION

Recovery Guide, the [Choose Setup Lan-

guage] dialog box appears. Select a lan-

guage and follow the on-screen

instructions. The Error Recovery Guide

dialog box is automatically displayed when

the installation is complete. Wait until the

installation of the ISIS starts.

7. Select a language for the installation on the

[Choose Setup Language] dialog box, and then

click the [Next] button.

8. Install the driver, following the on-screen

instructions.

9. When you see the [InstallShield Wiizard Com-

plete] dialog box, click the [Finish] button.

Your computer will restart and detect the scanner. Do

not remove the Setup CD-ROM from the CD drive until

your personal computer completely starts up again.

Depending on the operating system you

ATTENTION

are using, you may need to do the follow-

ing.

Windows 2000:

If you see the [Digital Signature not

Found] dialog box, click [Yes].

Windows Vista:

If you see the [Found New Hardware] dia-

log box, select [Locate and install driver

software], and then in the [User Account

Control] dialog box, click the [Continue]

button, if it is displayed.

The installation of FUJITSU ISIS is complete.

Next, install ScandAll PRO.

To make sure that FUJITSU ISIS is suc-

ATTENTION

cessfully installed, perform a scan with a

TWAIN-compliant application such as

ScandAll PRO. For information about how

to scan with ScandAll PRO, refer to sec-

tion 2.4 "Checking Scanner Driver Opera-

tion" on page 11.

ScandAll PRO

■ Installing ScandAll PRO

ScandAll PRO is software for scanning images, which is

in conformity with both TWAN/ISIS standards. Using

FUJITSU TWAIN 32 or FUJITSU ISIS together with

ScandAll PRO allows you to create document images.

Be sure to log on as a user with "Adminis-

ATTENTION

trator" privileges.

1. Insert the Setup CD-ROM into the CD drive.

⇒

appears.

2. Click [INSTALL PRODUCTS], and then click

[ScandAll PRO].

3. Select a language for the installation on

[Choose Setup Language] dialog box, and then

click the [OK] button.