Fujitsu 5900C - fi - Document Scanner Getting Started - Page 28
Browse online or download pdf Getting Started for Scanner Fujitsu 5900C - fi - Document Scanner. Fujitsu 5900C - fi - Document Scanner 30 pages. Fujitsu fi-5900c: supplementary guide
Also for Fujitsu 5900C - fi - Document Scanner: Brochure & Specs (2 pages), Supplementary Manual (4 pages)
Print Page
Appendix 3
ARNI N G
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description
Parts No.
Pad
PA03450-
K014
Pick rollers
PA03450-
K011
Brake roller
PA03450-
K013
Separator
PA03450-
rollers
K012
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when scanning A4/Letter sized, 20lb paper. This clean-
ing cycle varies according to the type of papers scanned
and how frequently the scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
5
AP-
REPLACING CONSUMABLES
During its operation, the inside
glass of the ADF becomes very
hot.
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
Standard
Replacement Cycle
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
The following illustrations show the locations of the
consumables. Refer to "Chapter 5 Replacing Consum-
ables" fi-5900C Operator's Guide on the Setup
CD-ROM.
Pick roller
Pad
■ Pad
To remove
Separator roller
Brake roller
Pad
To install