Fujitsu fi-4530C Getting Started - Page 17

Browse online or download pdf Getting Started for Scanner Fujitsu fi-4530C. Fujitsu fi-4530C 27 pages. Image scanner
Also for Fujitsu fi-4530C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Brochure & Specs (2 pages), Installation Procedures (3 pages), Consumable Replacement And Cleaning Instructions (14 pages), Cleaning Instructions Manual (13 pages), Cleaning Instructions (2 pages), Instruction Manual (10 pages), Installation Procedure (5 pages)

Print Page

4. Click [INSTALL PRODUCTS].

5. Click [ISIS Driver] on the window below.

6. Select a language used for installation on

[Choose Setup Language] window and click

[OK].

7. Install the application following the instructions

on the window.

8. When the [InstallShield Wiizard Complete] win-

dow appears, click [Finish].

9. Your computer is restarted and the scanner will

be detected. Do not remove the Setup

CD-ROM from the CD drive until your PC will

be completely restarted.

Depending on the OS, the following oper-

ATTENTION

ations may be necessary.

For Windows 98:

When a request for inserting the CD-

ROM of Windows 98 appears, insert it

into the CD drive and click the [OK] but-

ton.

For Windows 2000:

When [Digital Signature not Found]

appears, click [Yes].

For Windows XP:

1. When [Found New Hardware Wizard]

appears, confirm that the Setup

CD-ROM is set in the CD drive, then

click the [Next] button..

2. When any alarm is displayed on [Hard-

ware Installation] window, click the

[Continue Anyway] button.

3. Click the [Finish] button when the instal-

lation is finished.

■ Installing QuickScan

"QuickScan Pro" is image capturing software that com-

plies with the ISIS standard. With the FUJITSU ISIS

scanner driver, you can capture images by using a

FUJITSU image scanner fi-series product.

When using Windows NT 4.0, Windows

ATTENTION

2000 or Windows XP, log on as a user

with "Administrator" privileges (privi-

leges of the administrator of your PC).

1. Insert the Setup CD-ROM into a CD drive.

⇒

<SETUP DISK STARTUP SCREEN> appears.

Pro