Fujitsu fi-4530C Consumable Replacement And Cleaning Instructions - Page 6

Browse online or download pdf Consumable Replacement And Cleaning Instructions for Scanner Fujitsu fi-4530C. Fujitsu fi-4530C 14 pages. Image scanner
Also for Fujitsu fi-4530C: Getting Started (27 pages), Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Brochure & Specs (2 pages), Installation Procedures (3 pages), Cleaning Instructions Manual (13 pages), Cleaning Instructions (2 pages), Instruction Manual (10 pages), Installation Procedure (5 pages)

Fujitsu fi-4530C Consumable Replacement And Cleaning Instructions
fi-4530C & fi-5530C C
ONSUMABLE
6
R
C
EPLACEMENT AND
LEANING
R
P
R
EPLACING THE
ICK
Lift the Pick Roller Shaft out
of the scanner in the
direction of the arrow. The
bushing is fixed to the shaft
on the end shown. On the
opposite end of the shaft the
bushing is loose and will fall
off. Use caution so you
don't loose this bushing.
Remove the loose bushing
from the end of the Pick
Roller Shaft. Lift up slightly
on the Tab shown and slide
the Pick Roller off of the
shaft while the assembly is
out of the scanner.
Attach the new Pick Roller
by sliding it on to the shaft.
Rotate the Pick Roller to
align the screw on the shaft
with the slot on the Pick
Roller. Be sure the Pick
Roller tab clicks and the Pick
Roller is locked in place on
the shaft.
I
NSTRUCTIONS
(
.)
OLLER
CONT
Tab
Screw On
Shaft
Pick
Roller
Shaft
Slot on Pick
Roller