Fujitsu FI-5015C Getting Started - Page 20

Browse online or download pdf Getting Started for Scanner Fujitsu FI-5015C. Fujitsu FI-5015C 24 pages. Image scanner
Also for Fujitsu FI-5015C: Getting Started (26 pages), Brochure & Specs (2 pages), Consumable Replacement And Cleaning Instructionsmable Replacement And Cleaning Instructions (10 pages)

Print Page

Symptom

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

The generated images are

elongated.

There is a shadow on the

leading edge of the gener-

ated image?

* "Multi feed" means that more than 2 papers are fed at the same time.

Check this item

Do the documents satisfy the "Docu-

ment Quality" in Section 2.3.1of the fi-

5015C Operator's Guide?

Is the thick document placed on the Flat-

bed?

Is the Pick roller unit dirty?

Is the Pick roller unit worn out?

Are the Pick roller unit dirty?

Have you adjusted the offset (the scan-

ning starting position)?

Scan the document by Flatbed.

Is the thick document placed on the Flatbed?

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Replace the Pick roller unit. Refer to the Opera-

tor's Guide "3.3.4 Replacing the Pick roller unit".

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Adjust the [Sub-scan Setting] on [Scanners and

Cameras] in the control panel.

AP-2

Remedy