Fujitsu FI-5120 Getting Started - Page 11

Browse online or download pdf Getting Started for Scanner Fujitsu FI-5120. Fujitsu FI-5120 28 pages. Color duplex workgroup scanners
Also for Fujitsu FI-5120: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specifications (2 pages)

Print Page

Chapter2

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to "fi-5120C/fi-

5220C Operator's Guide" "7.2 Installation Speci-

fications" in the Setup CD-ROM.

For fi-5120C, go to Step 3.

2. Unlock the Shipping lock.

The carrier unit inside the scanner is fixed in

place by the shipping lock to prevent the scanner

from becoming damaged during transportation

from the factory.

After transporting and placing the scanner, tilt the

scanner (approx. 30 degrees) and release the

Shipping lock on the bottom of the scanner.

Approx.30

degrees

Lock

3. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the next figure below.

The Side guides of the ADF paper chute have to

face up.

INSTALLATION OF THE SCANNER

Release

fi-5120C/fi-5220C Image Scanner Getting Started

ADF paper chute

Side guide

4. Connect the AC adapter.

Use only the AC adapter provided by the

ATTENTION

manufacturer.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

may flash for an instant when plugging the

HINT

AC cable into the outlet.

Tab