Brother MFC-7440N User Manual - Page 29

Browse online or download pdf User Manual for Fax Machine Brother MFC-7440N. Brother MFC-7440N 32 pages. Quick setup guide - spanish
Also for Brother MFC-7440N: Quick Setup Manual (32 pages), Specifications (4 pages), Quick Setup Manual (32 pages), (Spanish) Guía De Configuración Rápida (32 pages)

Print Page

Web Based Management

(web browser)

The Brother print server is equipped with a web server

that allows you to monitor its status or change some

of its configuration settings, using HTTP (Hyper Text

Transfer Protocol).

Note

• The User Name is 'admin' and the default

password is 'access'. You can use a web

browser to change this password.

• We recommend Microsoft Internet Explorer

6.0

(or higher) or Firefox

Windows

and Safari™ 1.0 for Macintosh

Please also make sure that JavaScript and

cookies are always enabled in whichever

browser you use. We recommend you upgrade

to Safari™ 1.2 or higher to enable JavaScript.

To use a web browser, you will need to know

the IP address of the print server.

Open your browser.

Type http:// printer_ip_address /into your

browser (Where "printer_ip_address" is the IP

address of the printer or the print server name).

For example http://192.168.1.2/

See Chapter 2 of the Network User's Guide.

1.0 (or higher) for

For Network Users

Restoring the network

settings to factory default

To restore all network settings of the internal

Print/Scan server to factory default, please follow the

steps below.

Make sure the machine is not in use, then

disconnect all the cables from the machine

(except power cable).

Press Menu, 4, 0.

Press 1 to select Reset.

Press 1 to select Yes.

The machine will restart. Re-connect cables

once this is complete.

Print the Network

Configuration List

You can print the Network Configuration List to

confirm the current network settings. To print the

Network Configuration List:

Make sure that the front cover is closed and the

power cord is plugged in.

Turn on the machine and wait until the machine

is in the Ready state.

Press Reports and

Network Configuration. Press OK. The

machine will print the current network settings.

to select