Fujitsu FI-5530C2 Getting Started Manual - Page 26

Browse online or download pdf Getting Started Manual for Scanner Fujitsu FI-5530C2. Fujitsu FI-5530C2 27 pages. Image scanner
Also for Fujitsu FI-5530C2: Getting Started (28 pages), Installation Procedures Manual (6 pages), Specifications (2 pages), Getting Started Manual (11 pages), Cleaning Instructions (2 pages), Cleaning Instructions (2 pages), Getting Started (11 pages)

Fujitsu FI-5530C2 Getting Started Manual
Appendix3
During its operation, the inside
ARNI N G
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description
Parts No.
Pad ASSY
PA03334-
0002
Pick roller
PA03334-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when using A4/Letter woodfree or wood containing
2
paper 64 g/m
(17 lb). This cycle varies according to the
type of the used paper and how frequently the scanner is
used and cleaned.
Use only the specified consumables.
ATTENTION
AP-5
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 100,000 scans or
one year
After 200,000 sheets
or one year
The following illustrations show the locations of the
consumables. For details, refer to chapter 4 "Replacing
Consumables" of "fi-5530C2 Operator's Guide" on the
Setup CD-ROM.

■ Replacing the Pad ASSY

To remove
Pad ASSY

■ Replacing the Pick Roller

To attach
Sheet guide
Pick roller