Fujitsu FI-5530C2 Getting Started - Page 4

Browse online or download pdf Getting Started for Scanner Fujitsu FI-5530C2. Fujitsu FI-5530C2 11 pages. Image scanner
Also for Fujitsu FI-5530C2: Getting Started (28 pages), Installation Procedures Manual (6 pages), Specifications (2 pages), Getting Started Manual (27 pages), Getting Started Manual (11 pages), Cleaning Instructions (2 pages), Cleaning Instructions (2 pages)

Print Page
Fujitsu FI-5530C2 Getting Started
Chapter2

2.1 Installing the Scanner

1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to section 7.2
"Installation Specifications" of "fi-5530C2 Oper-
ator's Guide" on the Setup DVD-ROM.
2. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into
the corresponding slots in the scanner as shown in
the figure below.
The Side guides of the ADF paper chute have to
face up.
ADF paper chute
Side guide
3. Connect the AC adapter.
Use only the AC adapter provided by the
ATTENTION
manufacturer.
1) Connect the AC cable to the AC adapter.

INSTALLATION OF THE SCANNER

Tab
2) Connect the AC adapter connector to the scan-
ner's DC inlet.
3) Plug the AC cable into the outlet.
The Function Number Display and the LED
HINT
may flash for an instant when plugging the
AC cable into the outlet.
4