Fujitsu fi-5650C Getting Started Manual - Page 35

Browse online or download pdf Getting Started Manual for Scanner Fujitsu fi-5650C. Fujitsu fi-5650C 40 pages. Image scanner
Also for Fujitsu fi-5650C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specifications (2 pages), Brochure & Specs (2 pages), Instruction Manual (11 pages), Consumable Replacement And Cleaning Instructions (19 pages), Cleaning Instructions (2 pages), Cleaning And Maintenance (39 pages)

Print Page

Symptom

There is a shadow on

the leading edge of

the scanned images.

The ADF makes

strange noises dur-

ing scanning.

Check this Item

Did you cleaned all of the rollers?

Do the documents qualify the

"Document Quality" in "8

DOCUMENT SPECIFICATON

FOR THE ADF" of the "fi-5650C

Operator's Guide"?

Did you adjust the offset? (Starting

position for scanning the document)

Did you install the ADF paper chute

correctly?

TABLE 1.

Remedy

Clean all the rollers. For details, refer to "4 DAILY

CARE" of the "fi-5650C Operator's Guide"

Use documents that satisfy the requirements.

For Windows 98, Windows Me, Windows 2000

and Windows XP, adjust the [Sub-scan Setting\ on]

Scanners and Cameras\ in the [Control Panel].

For Windows 95 and Windows NT 4.0, right-click

the Scanner Control Center icon, select [Options] -

[Sub-scan Setting] and adjust the offset. Please

refer to Chapter 7 "Online Setup" of the "fi-5650

Operator's Guide" and adjust the offset from the

Software Operation Panel (online settings).

Please verify that the ADF paper chute is installed

correctly. For details on the installation of the ADF

paper chute, refer to section 2.1, "Installing the

scanner," on page 2.

AP-5