Fujitsu fi-5650C Getting Started Manual - Page 39

Browse online or download pdf Getting Started Manual for Scanner Fujitsu fi-5650C. Fujitsu fi-5650C 40 pages. Image scanner
Also for Fujitsu fi-5650C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specifications (2 pages), Brochure & Specs (2 pages), Instruction Manual (11 pages), Consumable Replacement And Cleaning Instructions (19 pages), Cleaning Instructions (2 pages), Cleaning And Maintenance (39 pages)

Print Page
Fujitsu fi-5650C Getting Started Manual
Appendix 3 Replacing
Consumables
CAUTION
Consumables and
Replacement Cycle
The following table shows the specifications
of consumables and guidelines for the
replacement cycle.
Description
Part No.
Brake Roller
PA03338-K010
Pick Roller*
PA03338-K011
* A set of two rollers.
For purchase of consumables, contact the store
where you purchased the scanner or an autho-
rized FUJITSU scanner service provider.
The replacement cycles above are rough
guidelines for the case of using A4/Letter
woodfree or wood containing paper 64 g/m2
(17 lb). This cycle varies according to the type
The glass of the inside of the
ADF becomes hot during opera-
tion.
When you clean the inside of
the scanner, turn OFF the power
and unplug the AC cable from
the outlet and wait for at least
three minutes.
TABLE 6.
Standard
Replacement
Cycle
After 250,000
scans or one
year.
After 250,000
scans or one
year.
of the used paper and how frequently the
scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
The following pictures shows the locations of
the parts to be replaced. Refer to "Chapter 4
Replacing Consumables" fi-5650C Operator's
Guide on User Manual CD-ROM.
Pick Roller Set
Brake Roller
AP-9