Fujitsu fi-5650C Cleaning And Maintenance - Page 31

Browse online or download pdf Cleaning And Maintenance for Scanner Fujitsu fi-5650C. Fujitsu fi-5650C 39 pages. Image scanner
Also for Fujitsu fi-5650C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specifications (2 pages), Brochure & Specs (2 pages), Getting Started Manual (40 pages), Instruction Manual (11 pages), Consumable Replacement And Cleaning Instructions (19 pages), Cleaning Instructions (2 pages)

Print Page
Fujitsu fi-5650C Cleaning And Maintenance
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom
: Images are distorted or blurred.
Back to the trouble shooting index
Are the upper/lower glasses inside the ADF clean?
YES
Is the ADF cover pressed down or heavy object placed on the
ADF during scanning?
NO
Is something causing the scanner to vibrate during scanning?
NO
Is the scanner installed on a flat, level surface?
YES
If you cannot solve the problem after taking measures, check the
items in
"6.3 Items to check before contacting the dealer where
you bought the
scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
Clean dirty locations.
NO
Do not press down the ADF or place heavy object on the ADF
during scanning.
YES
Do not allow anything to cause the scanner to vibrate while
scanning.
YES
Install the scanner on a flat, level surface.
NO