Brother MFC-9070 Setting-Up Manual

Browse online or download pdf Setting-Up Manual for Fax Machine Brother MFC-9070. Brother MFC-9070 5 pages. Windows xp
Also for Brother MFC-9070: Quick Setup Manual (4 pages), Parts Reference List (26 pages)

Print Page

For Windows

Setting Up the machine and PC to Work Together

Before You begin

•

When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).

•

Some illustrations are based on the MFC-9070.

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

You must set up the hardware and install the driver before you can use your machine as a printer and scanner

with your application. Brother offers both a Windows

on the CD-ROM. The Windows

steps below. The Brother Native driver offers some features that are not available with the Windows

Tested Driver. The features available on the Brother Native driver can vary by model. Please visit us at

http://solutions.brother.com

to the installation procedure for the Brother Native Driver.

Installation of Brother Drivers for Windows

Step 1.

Shut down and turn OFF your computer.

Step 2.

Unplug the MFC from the AC outlet and disconnect the interface cable if you have

already connected it.

Step 3.

Turn on your computer.

Note: If the "Found New Hardware Wizard" appears before the installation of the software, you should click on

Cancel to exit the Wizard, and then start the installation program from the CD-ROM.

Step 4.

Insert the CD-ROM labelled "For Windows

Click your language. The CD-ROM

main menu will appear.

If the model name screen appears,

click on your model name.

The CD-ROM main menu will appear.

If the CD-ROM does NOT start

automatically, start the installer

application by clicking Start, Run,

then type x:\ setup.exe (where x:\ is

the drive letter of your CD-ROM

drive).

When the PaperPort

8.0 SE Setup

window is displayed, click Next.

*1 MFC Software Suite includes Printer Driver, Scanner Driver, PC-FAX software and Remote Setup.

Windows

XP restricts scanning resolution to a max. of 600 dpi and Paper size to 8.5" (215.9 mm) x 11.7" (297 mm).

Logo Tested Driver is automatically installed when you follow the installation

for details on these features. You must follow steps 1 to 7 before you can proceed

Click Install Software.

After reading and accepting the License Agreement, enter your user information and

click Next.

XP Users

Logo Tested (WHQL) driver and a Brother Native Driver

XP" into the CD-ROM drive.

Click MFC Software Suite in Main

Application, and then click Install. *1

Logo

Click Install.

Select Typical and click Next.